- Strap separation:
- Not a problem
- Cup's width:
- There is empty fabric on the sides (Cup too wide)
Bra » Fauve » Annalise (0201) » 30E » Bras » Owner
Measurements
Measurement | Cm |
---|---|
Search by measurements | |
Fits ribcage | 0.0 |
B. perimeter | 0.0 |
Stretched Band | 81.0 |
Band Length | 68.0 |
Stretch ratio | 1.2 |
Cup width | 13.0 |
Cup depth | 22.5 |
Depth ratio | 1.7 |
Wire length | 25.0 |
Cup height | 0.0 |
Cup separation | 2.3 |
Gore height | 5.5 |
Wing height | 8.0 |
Strap width | 1.7 |
Hooks | 2 |
Labeled as
Index | 30:6 |
---|---|
EU | 65E |
US | 30E |
FR | 80E |
AUS | 8E |
UK | 30E |
Review
1
like
like
Didn't fit
A very pretty bra, the printed fabric is overlain with white mesh throughout. The lace trims on the seams and edges of the cup are somewhat thick and show through shirts. All the elastic has a decorative trim on the edges that also helps prevent the strap adjusters from slipping. The front part of the straps is covered with the printed fabric but they are still fully adjustable with a little effort.
This bra is quite shallow at the bottom of the cups, but has some volume at the top. I am shallow but tending towards full on bottom, so it didn't work for me.
I think it would work best for a shallow but fuller on top shape. Typical of Fauve, the wires are fairly wide and also quite firm. I think the cup runs a little large, and the band is on the looser side for a 30.This bra is not owned any more
Updated on Jul 21, 2013 Flag this