- Bottom of the cup:
- Can't quite fill it
- Cups separation:
- Too separate for my boobs
- Band fit:
- The back of the bra is not at the same level as the front (rides up)
- Cup's width:
- There is empty fabric on the sides (Cup too wide)
- Center gore comfort:
- Underwires dig into sternum, because they are too high
- Strap separation:
- Not a problem
Bra » Cleo » Juna Balconnet Bra (6461) » 28GG » Bras » Owner
Measurements
| Measurement | Cm |
|---|---|
| Search by measurements | |
| Fits ribcage | 0.0 |
| B. perimeter | 0.0 |
| Stretched Band | 77.5 |
| Band Length | 61.0 |
| Stretch ratio | 1.3 |
| Cup width | 14.7 |
| Cup depth | 24.1 |
| Depth ratio | 1.6 |
| Wire length | 31.8 |
| Cup height | 0.0 |
| Cup separation | 2.5 |
| Gore height | 8.9 |
| Wing height | 9.5 |
| Strap width | 1.9 |
| Hooks | 2 |
Labeled as
| Index | 28:10 |
|---|---|
| EU | 60GG |
| US | 28GG |
| FR | 75GG |
| AUS | 6GG |
| UK | 28GG |
Review
0
like
like
Didn't fit
I have a bit too much immediate projection for the 28GG - Cleo » Juna (6461) , but the molded cup helps hide the fit issue a little. The wires are wider than my root, but I need that when there isn't enough projection (so at least the tissue can go outward). The seam down the center of the cup shows through clothing, which kind of defeats the purpose of a molded cup, and lace doesn't lay flat. The gore comes up too high for me, so it sits on breast tissue in the center - I wish it was about an inch shorter. The 1/2" seam below the underwire curves under the wire and creates pressure in that spot, so I have to frequently adjust that.
Updated on Jul 20, 2013 Flag this
