Gore digs; I suspect it's because the top of the cup isn't filled. Wrong shape, cut for full-on-top.
- Top of the cup:
- Wrinkles, can't quite fill it
- Cups separation:
- Too separate for my boobs
Measurement | Cm |
---|---|
Search by measurements | |
Fits ribcage | 0.0 |
B. perimeter | 0.0 |
Stretched Band | 0.0 |
Band Length | 64.0 |
Stretch ratio | 0.0 |
Cup width | 13.5 |
Cup depth | 24.5 |
Depth ratio | 1.8 |
Wire length | 23.9 |
Cup height | 0.0 |
Cup separation | 2.0 |
Gore height | 7.0 |
Wing height | 8.7 |
Strap width | 1.2 |
Hooks | 2 |
Index | 32:6 |
---|---|
AUS | 10E |
UK | 32E |
Didn't fit
Straps run a little tight - I've had to let them out to their full length. (On unpadded Cleos, I normally have the slider sitting about two inches above the band, for reference.)
This one is cut for full-on-top shapes: the upper lace edge is extremely loose (and gets looser the tighter you pull the straps, paradoxically). I thought having an even shape it might not be too bad, but I suspect I could even get away with a 32DD in this particular bra, the cup is so voluminous.
Updated on Apr 21, 2015 Flag this
Gore digs; I suspect it's because the top of the cup isn't filled. Wrong shape, cut for full-on-top.